E-TVCS
Diesel Engine:
Kubota's
unique E-TVCS (Three Vortex Combustion System) indirect injection Diesel
Engine provides greater power and higher torque with low noise and
vibration. This environmentally friendly engine also produces
cleaner emissions, meeting EPA standards
Bevel Gear 4WD:
Work
efficiency is increased under most conditions with Kubota's bevel gear
type 4WD system by providing equal pulling power at all steering angles
as well as smaller turning radius. The bevel gears are completely
sealed in oil only requiring routine maintenance.
Hydraulic Control
System:
Operating
implements and other tractor functions are easy with Kubota's powerful
and responsive hydraulic system. Designed for durability, it will
keep you running for the long haul. One Self Canceling Detent
(SCD) remote valve comes standard. A second SCD or Float Detent
(FD) remote valve is optional.
One-Piece Full Open
Hood:
The one-piece
full open hood allows easy maintenance by providing easy access to the
engine compartment.
KUBOTA® |
|
Hydrostatic
Power Steering:
Hydrostatic
power steering makes tractor operation easy and reduces operator
fatigue, especially during loader applications.
Live-Independent,
Hydraulic PTO:
With the
hydraulic independent PTO, smooth, self-modulating engagement is
automatically provided. A PTO brake provides smooth stopping and
retains the PTO shaft. The shaft can be rotated 60 degrees with
flip up shield to facilitate hook-up with the engine off.
3-Point Hitch:
While the
M5700/M6800 provide the category I and II 3-point hitch, the M8200/M9000
models provide only the category II 3-point hitch. The hitch has
an adjustable top link, crank-type lift rod and telescopic stabilizers
to provide faster, easier attachment of rear-mounted implements
(telescopic lower link ends, standard on M6800, M8200, M9000).
ISO-Mounted Seme-Flat
Deck
With Hanging Pedals:
Plenty of
legroom exists on the deck, with added space provided through hanging
pedals. The ISO- (isolated) mounted deck, with rubber mat, greatly
reduces vibration, minimizing operator fatigue.
|
|
FRONT
LOADERS
LA1002/LA1162/LA1251A Front
Loader:
These
performance-matched loaders (LA1002:M5700/M6800; LA1162:M6800;
LA1251A:M8200/M9000) offer enhanced performance and increased
productivity thanks to Kubota's advanced hydraulic technology. The
powerful lifting force is remarkably easy to operate; all movements are
controlled by a single lever joystick. Due to the Series/Parallel
circuit the boom and the bucket can be operated simultaneously for
faster cycle times. The LA1162 and LA1251A loaders have a 4-bar
bucket linkage mechanism for larger rollback/dumping angles that
provides easier filling and faster, cleaner dumping performance.
The front loader quick attaches and detaches easily without the
use of tools and only a few minutes. The regenerative dump circuit
expedites fast dumping cycles when using the dump circuit alone.
These advantages offer great efficiency with increased productivity to
your loader work, and that being the principal application for hydraulic
shuttle tractors.
 |
