2006 Kubota M-Series, Front Loader Features

All New Design
The Kubota M-Series Front Loader has undergone a full model change. The new loaders have dramatically increased lifting power, perfect for farm use. Its design has also been fully integrated into the new tractor design with a slanted boom to match the tractor's hood. This not only gives the M-Series a sleeker look it supplies the operator with more visibility and clearer sight lines to the bucket and loader sides.

Lifting Power and Height Two separate boom cylinder fulcrum points (Power position and Height position) give you the option to increase the M-Series Front Loader lifting power or height based on your needs. When using the pallet fork or bale spear you may want to set the fulcrum to give you more height. For bucket work, a lower setting offers more power. Improved Bucket Some recent improvements in the loader bucket include a round back, which increases durability and makes dumping sand and soil easier. Standard bucket size is 72"; large capacity buckets (for LA 1353 only) are 84".	Frame The frame of the front loader maintains its sturdy, thick steel frame, but its design has been simplified by removing braces and connectors. This helps to lessen effort and shorten the time it takes to attach the loader and offers increased visibility.	Protected Cylinder Tubes To better protect the tractor hydraulics and offer the operator more visibility, the hydraulic tubes are neatly tucked inside the loader boom. Hydraulic tube covers further provide protection from wear and tear.
	Skid Steer-Type Quick Coupler This standard M-Series feature makes attaching buckets, bale spears and pallet forks quick and easy. 4-Bar Linkage Thanks to an upgraded 4-bar bucket linkage, the rollback and dumping angle has been increased for quicker scooping and dumping.	KUBOTA TOUGH

Quick-Mount Attach/Detach
Attach or detach the front loader in moments without the use of tools. The boom stands and mounting pins make this task a snap, allowing an extra measure of productivity and tractor versatility. A single-lever Hydraulic Quick Coupler, available for the loader's hydraulic fittings, allows you to release all four lines at once.

Rubber Caps
A new feature, rubber caps, prevent grease drips helping to keep the operator's clothes clean. The caps also give the loader a more appealing look.

Joystick Control

Located in front of the control console for easy access, the joystick offers you the ability to control the movement and speed of the loader with a single lever. The Series Circuit makes simultaneous boom and bucket operation possible, while the Regenerative Bucket Dump Circuit enables quick dumping for efficient operation with quick cycle times.

FRONT LOADER OPTIONS

Hydraulic Self-leveling Valve
This optional feature allows the operator to raise or lower the loader boom while keeping the bucket level to the ground. This will help prevent spills when carrying soil or sand and will make pallet handling smooth and easy. This function can be switched off for times when bucket angles are more advantageous, for instance, during excavation.

Kubota Shockless Ride (KSR)

The KSR absorbs loader shock and reduces operator fatigue. This option is perfect if your tasks include a great deal of tight turns or lifting and dumping of heavy loads. It effectively takes the "bounce" out of handling round bales.

Single-Lever Hydraulic Quick Coupler

The optional quick coupler allows the operator the ability to attach all four hoses at once. This makes attaching and detaching quick and easy, even when you're doing it often.

3rd Function Valve
The optional 3rd function valve broadens the scope of the front loader operation by enabling the use of a grapple bucket and various other hydraulically controlled attachments. The 3rd function valve can be activated with a button located on the grip of the joystick.

M-SERIES FRONT LOADER SPECIFICATIONS

Model	LA1153		LA1353
Tractor applications	M5040, M6040, M7040		M8540, M9540
Boom Cylinder Fulcrum	Height position	Power position	Height position	Power position
Maximum Lift Height (Pivot pin)	132.7 in.	117.2 in.	146.5 in.	133.5 in.
Clearance w/Attachment Dump	101.5 in	85.5 in.	113.4 in.	100.2 in.
Reach @ Maximum Height	14.1 in.	31.9 in.	21.1 in.	36.5 in.
Maximum Dump Angle	43�	60�	49�	60�
Reach w/Attachment on Ground	76.7 in.		87.8 in.
Maximum Rollback Angle	43�		40�
Digging Depth (When Bucket is Level)	5.3 in.	4.4 in.	4.7 in.	4.1 in.
Overall Height in Carry Position	61.9 in.		67.6 in.
Material Bucket Width/capacity (Heaped)	72 / 19.43 in./cu.ft.		84 / 22.60 in./cu.ft.
Lift Capacity (Bucket Center)	2326 lbs.	2536 lbs.	2712 lbs.	2977 lbs.
Raising Time to Full Height w/out Load^*1)	4.7 second		4.1 second
Lowering time w/out Load (powerdown)^*1)	3.5 second		3.0 second
Attachment rollback Time	3.0 second		2.1 second
Attachment Dumping Time	2.7 second		1.8 second
^*1) w/Standard valves.

2006 M-Series Features Menu Options