Kubota M5040/M6040 Specifications
 
Model M5040 M6040
Engine Engine V3007-DI V3307-DI
Type (Make: KUBOTA) E-CDIS, Direct Injection
No. of cylinders/Aspiration 4-Natural 4-Natural
Engine net power 50.5 HP 62 HP
PTO power 45 HP 55 HP
Total displacement 186 cu.in. 203 cu.in.
Engine rpm 2600 rpm 2600 rpm
Fuel tank capacity 18.5 on ROPS model, 29.1 on CAB model
Alternator 45 Amp on ROPS model, 60 Amp on CAB model
Transmission No. of speeds F8/R8
Main gear shift (8 speeds) Fully Synchronized
Synchro-shuttle Standard (Hydraulic-shuttle available on selected models), Dash-mounted lever on ROPS model, Column-mounted lever on Cab models
Main clutch material/diameter Cerametallic / 10.8 in.
Main clutch type Dry single plate (Multiple wet disc on Hydraulic-shuttle models)
Brake type Mechanical wet disc
Mechanical differential lock Rear Standard
4WD clutch type Mechanical
PTO Type Live-independent, hydraulic PTO with PTO brake, wet clutch
Speed 540 rpm
Hydraulics Pump capacity (3-point hitch) 11.0 gpm
3-point hitch Telescopic lower link ends, Telescopic stabilizers
   Category I / II
   Control system Position, draft (top link sensing) & mixed control
   Lift capacity @ 24 in. behind  lift point 3307 lbs.
   Cylinder type Two external cylinders
   No. of standard remote valves 1 (2nd, 3rd & flow control valve optional)
Other features 4WD drive system (4WD model) Bevel gear type
Steering Hydrostatic power steering
Tilt steering Standard
Hood type Full open, slanted, steel
Pedal type Hanging
Deck type (ISO-mounted w/rubber mat) Semi-flat on ROPS model, full-flat on CAB model
Panel type Electronic
Fender shape Wide, round
Standard tire size 2WD Front/Rear 6.50-16 F2 / 14.9-28 R1 7.50-16 F2 / 16.9-28 R1
4WD Front/Rear 9.5-24 R1 / 14.9-28 R1 9.5-24 R1 / 16.9-28 R1
Dimensions & weight Overall length (ROPS) model 2WD/4WD 140.4 / 135.6 in.
Overall length (CAB model) 2WD/4WD 140.4 / 135.6 in.
Overall height (top of ROPS/CAB) 95.3 / 98.2 in. 96.9 / 99.8 in.
Overall width (Minimum) 73.2 / 73.2 in.
4WD Wheelbase (ROPS/CAB) 80.7 / 83.1 in.
2WD Wheelbase (ROPS/CAB) 82.1 / 84.4 in.
Crop clearance (Front Axle) 16.5 in.
Tread width Front 2WD 55.9-71.7 in. 55.9-71.7 in.
Front 4WD 52.4-5603 in. 52.4-5603 in.
Rear 52.0-67.7 in. 55.9-67.7 in.
Turning radius (w/o brake) 2WD/4WD 11.2 / 11.8 ft.
Tractor weight (ROPS model) 2WD/4WD 3748 / 3968 lbs. 3858 / 4078 lbs.
The company reserves the right to change the above specifications without notice.
For your safety, KUBOTA strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt in almost all applications.
 

Return to M-Series        Return to Specifications Menu

Return to the Deen Implement Co. home page