The 2710L is designed for heavier grass and brush or uneven terrain and is available with the weight box configured for either left wing or right wing operation. With a ten foot cutting width and a 3-1/2 inch diameter cutting capacity, the 2710L is rated for use on tractors with a minimum of 60 PTO horsepower.
GENERAL INFORMATION
Manufacturer
Bush Hog
Model Year
2012
Model
2710L Single Wing Flex Rotary Cutter
MSRP
Request a Quote
DIMENSIONS
Length
14 ft. 6 in.
Width
11 ft. 8 in. 8 ft. transport width
Cutting Width
10 ft. 6 in.
Cutting Height
2 to 14 in.
MEASUREMENTS
Cutting Capacity
3-1/2 in. diameter
Wing Flex Range
87° up - 22° down
Blades
Uplift
Blade Size
1/2 x 4 in.
Blade Tip Speed
16,000 fpm @ 540 rpm 15,912 fpm @ 1,000 rpm
Blade Overlap
6 in.
Deck Thickness
11 ga. top / 10 ga. bottom
OPERATIONAL
Driveline -- Wing
ASAE category 4
Gearbox HP Rating
235 hp transfer, 205 hp center and wing
Input Drive Line
Constant velocity or Cardan / jackshaft - category 5 (540 rpm), category 4 or 5 (1,000 rpm)
Front Deflector & Foot Guard
Belting
Rear Deflector
Band
Tires
Laminated, pneumatic or aircraft
Tractor PTO Speed
540 / 1,000 rpm
Hitch
Self leveling with Perma Level Hitch®, 2 in. ball hitch or swivel clevis hitch
Tractor Size
60 PTO hp minimum
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Deen Implement Co Locations
703 W Broad St (Hwy 80 & Broad St Exit) Forney, TX 75126
303 Corky Boyd Ave (Highway 64) Wills Point, TX 75169
.jpg)
